Router Bits
-
Series 91-000/100 Spoilboard Surfacing Cutter
Designed for surfacing MDF, particleboard and balsa core where "flow through" or "high flow" fixturing is employed using large capacity vacuum pumps. This method of surfacing spoilboards allows for much faster table planing. Usage: Aluminum, Plastics and Composite Wood Series: 91-000/100 -
Series 52-200 Double Flute - Solid Carbide Upcut Spiral Wood Rout
Designed for routing where upward chip removal, tool ridgidity, long life and high quality finish is desired. Usage: Natural Wood, Wood Composites, Solid Surface and some Plastics. Series: 52-200 -
Series 52-700 Double Flute - Solid Carbide Upcut Spiral O Flute
With High Helix geometry, Highly Polished Flutes and Improved Point Geometry these tools are designed to cut soft plastics with a remarkably smooth finish and upward chip flow. Usage: Soft Plastic, Extruded Acrylic, Nylon, ABS, PE, Acetal, PET, HDPE, UHMW, Polycarbonate, Solid Surface and Foam. Series: 52-700 -
Series 60-950 Solid Carbide Extreme Heavy Duty Chipbreaker/Finisher
Designed to be fed very fast while withstanding excessive cutting forces and at the same time leaving a smooth finish. Usage: Natural Wood and Wood Composites Series: 60-950 -
Series 60-100MC Series Marathon Compression Spirals
The LMT Onsrud Marathon Compression is a longer running tool due to advancements in cutting geometry and the addition of a unique Onsrud coating which is formulated to protect the cutting edge from the high temperatures generated when routing laminated and composite wood products. Usage: Double sided laminated and veneered Wood Composites Material: Melamine, Plywood, Laminates * = Mortise Compression Series: 60-100MC
-
Series 63-600 Single Flute-Solid Carbide Upcut Spiral O Flute
High speed cutters for machining aluminum sheet & block material. These tools are optomized for use on high-speed CNC mills, high speed machining centers & CNC routers. Usage: Aluminum plate and single/multi sheet aluminum. Helix Angle: 22 Degrees Series: 63-600 -
Series 60-100MW 1,2 and 3 Flute Solid Carbide Max Life Compression Spirals
Designed for maximum life when cutting in high wear applications. Unique geometries and carbides improve the wear characteristics of the tool under abrasive applications with superior part finish. Usage: Double sided laminated and veneered materials. Material: Melamine, Plywood, Laminates Helix Angle: 30 Degrees Series: 60-100MW -
63-500 Series Single Flute - Solid Carbide Upcut Spiral O Flute for Acrylics
These tools are designed to cut acrylics and achieve long tool life. Onsrud's unique cutting geometry produces a smooth edge finish regardless if it is cast or extruded acrylic. Usage: Acrylic -
Series 52-600 Double Flute - Solid Carbide Upcut Spiral O Flute
Low Helix geometry designed to cut soft and hard plastics with a smooth finish and upward chip flow. Usage: Soft and Hard Plastics, Solid Surface. Series: 52-600 -
Single Flute - Solid Carbide Upcut Spiral O Flute - Series 63-700 for Hard Plastics and 63-750 for Soft Plastics
Designed to provide a smooth finish in hard or soft plastics with upward chip removal. Usage: Acrylic, Nylon, Polycarbonate and Solid Surface Helix Angle: 21 Degrees Series: 63-700 for Hard Plastics & 63-750 for Soft Plastics -
Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose
Designed for carving and modeling operations. The improved tip geomentry gives a superior cut compared to most ballnose endmills. Usage: Plastic, Solid Surface, Block and Plate Aluminim, Natural Wood and Wood Composites. Material: SW, HW, CW, SP, HP, A, SSP -
Series 60-100PLR Polaris Compression Spirals
Polaris is LMT Onsrud's 2016 IWF Challenger's Award winner. The all new Polaris Compression Spiral is the next evolution in Technology and Innovation. Designed with maximum tool life in mind, Polaris features an advanced coating to protect each cutting edge of the tool. This coating reduces both wear and heat buildup. The result is less downtime, fewer tool changes, fewer re-runs and defects and decreased tooling costs.Usage:Laminated Wood Products, HPL and Fire Rated Materials Material: Melamine, Plywood, Laminates * = Mortise Compression Series: 60-100PLR