Tel: 1-877-228-0908

My Cart:

0 item(s) - US$0.00
You have no items in your shopping cart.

Wood

Wood

Router Bits for machining wood and wood composites

Prices are Discounted a Minimum of 20%. Please check the Bargain Bin for items having a larger discount.

18 Item(s)

Set Descending Direction
  1. Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose

    Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose

    Designed for carving and modeling operations. The improved tip geomentry gives a superior cut compared to most ballnose endmills. Usage: Plastic, Solid Surface, Block and Plate Aluminim, Natural Wood and Wood Composites. Material: SW, HW, CW, SP, HP, A, SSP
  2. Spoilboard Surfacing Cutter with HSK63F Integral Shank

    Spoilboard Surfacing Cutter with HSK63F Integral Shank

    The integral HSK 63F shank eliminates the need for a toolholder and collet. Other benefits include greatly increased rigidity and reduced runout. This enables faster feed rates, longer run times and better finish.

  3. Series 52-900  Double Flute - Solid Carbide Upcut Extreme Heavy Duty Standard

    Series 52-900 Double Flute - Solid Carbide Upcut Extreme Heavy Duty Standard

    Developed for demanding applications where upward chip removal, tool rigidity and long life are essential to success. Usage: Natural Wood and Wood Composites Series: 52-900
  4. Series 60-100 1,2,3 and 4 Flute Solid Carbide Compression Spirals

    Series 60-100 1,2,3 and 4 Flute Solid Carbide Compression Spirals

    Compression Design for optimum edge finish on both sides of laminated materials. Designed for low speed applications. Usage: Double sided laminated, veneered natural wood and wood composites. Material: Melamine, Plywood, Laminates Helix Angle: 30 Degrees Series: 60-100
  5. Series 64-000 Single Flute - Solid Carbide Downcut Spiral O Flute

    Series 64-000 Single Flute - Solid Carbide Downcut Spiral O Flute

    The polished flute allows for a razor sharp cutting edge and easy chip evacuation. The downcut spiral geometry improves part holding. Excellent performance in a wide range of materials. Usage: Plastic, Wood, Aluminum and Solid Surface
  6. Series 72-000 Solid Carbide Boring Bits

    Series 72-000 Solid Carbide Boring Bits

    Two styles of tools are available in this series. The brad point drill is designed to cut blind holes and produce a clean edge on the top surface. The 60 Degree Through Hole Drill is designed to produce through holes with clean edges on both sides. Usage: Solid Wood and Composite Wood Note: These Solid Carbide Drills will produce cleaner and more accurate holes than Standard Carbide Tipped Drills.
  7. Series 68-100 Single Flute - PCD Compression Tool

    Series 68-100 Single Flute - PCD Compression Tool

    This economical PCD compression tool will provide long tool life in abrasive wood products. Mortise tip allowing for through cuts and dado's to be produced using one tool. The compression design ensures chip free edges on the top and bottom. Usage: Composite Wood Series: 68-100 L = Left Hand Rotation * = Special Order. 4 week Delivery

  8. Series 65-000 Single Flute - Solid Carbide Upcut Spiral O Flute

    Series 65-000 Single Flute - Solid Carbide Upcut Spiral O Flute

    The polished flute allows for a razor sharp cutting edge and easy chip evacuation. Excellent performance in a wide range of materials. Usage: Plastic, Wood, Aluminum and Solid Surface
  9. Series 57-900  Double Flute - Solid Carbide Downcut Extreme Heavy Duty Standard

    Series 57-900 Double Flute - Solid Carbide Downcut Extreme Heavy Duty Standard

    Designed for routing where extreme loads are placed upon the cutting tools and when extra part hold down is required. Usage: Natural Wood and Wood Composites Series: 57-900
  10. Series 57-200MD Double Flute - Marathon Wood Rout Downcut (Coated)

    Series 57-200MD Double Flute - Marathon Wood Rout Downcut (Coated)

    The longest running downcut in the industry due to advancements in geometry and the addition of a unique Onsrud coating. Usage: Wood Composites Series: 57-200MD
  11. Series 91-000/100 Spoilboard Surfacing Cutter

    Series 91-000/100 Spoilboard Surfacing Cutter

    Designed for surfacing MDF, particleboard and balsa core where "flow through" or "high flow" fixturing is employed using large capacity vacuum pumps. This method of surfacing spoilboards allows for much faster table planing. Usage: Aluminum, Plastics and Composite Wood Series: 91-000/100
  12. Series 60-090 Solid Carbide Upcut Lock Mortise

    Series 60-090 Solid Carbide Upcut Lock Mortise

    The scalloped upcut cutting edge design and extra spinback provide fast material removal in deep cuts for horizontal and vertical lock mortise routing. Usage: Natural Wood and Wood Composites Series: 60-090
  13. Series 60-950 Solid Carbide Extreme Heavy Duty Chipbreaker/Finisher

    Series 60-950 Solid Carbide Extreme Heavy Duty Chipbreaker/Finisher

    Designed to be fed very fast while withstanding excessive cutting forces and at the same time leaving a smooth finish. Usage: Natural Wood and Wood Composites Series: 60-950
  14. Series 57-200  Double Flute - Solid Carbide Downcut Spiral Wood Rout

    Series 57-200 Double Flute - Solid Carbide Downcut Spiral Wood Rout

    Designed for routing where Downward chip removal, tool ridgidity, long life and high quality finish is desired. Usage: Natural Wood, Wood Composites, Solid Surface and some Plastics. Series: 57-200

  15. Series 60-100MC Series Marathon Compression Spirals

    Series 60-100MC Series Marathon Compression Spirals

    The LMT Onsrud Marathon Compression is a longer running tool due to advancements in cutting geometry and the addition of a unique Onsrud coating which is formulated to protect the cutting edge from the high temperatures generated when routing laminated and composite wood products. Usage: Double sided laminated and veneered Wood Composites Material: Melamine, Plywood, Laminates * = Mortise Compression Series: 60-100MC

  16. Series 52-200  Double Flute - Solid Carbide Upcut Spiral Wood Rout

    Series 52-200 Double Flute - Solid Carbide Upcut Spiral Wood Rout

    Designed for routing where upward chip removal, tool ridgidity, long life and high quality finish is desired. Usage: Natural Wood, Wood Composites, Solid Surface and some Plastics. Series: 52-200
  17. Series 60-100MW 1,2 and 3 Flute Solid Carbide Max Life Compression Spirals

    Series 60-100MW 1,2 and 3 Flute Solid Carbide Max Life Compression Spirals

    Designed for maximum life when cutting in high wear applications. Unique geometries and carbides improve the wear characteristics of the tool under abrasive applications with superior part finish. Usage: Double sided laminated and veneered materials. Material: Melamine, Plywood, Laminates Helix Angle: 30 Degrees Series: 60-100MW
  18. Series 60-100PLR Polaris Compression Spirals

    Series 60-100PLR Polaris Compression Spirals

    Polaris is LMT Onsrud's 2016 IWF Challenger's Award winner. The all new Polaris Compression Spiral is the next evolution in Technology and Innovation. Designed with maximum tool life in mind, Polaris features an advanced coating to protect each cutting edge of the tool. This coating reduces both wear and heat buildup. The result is less downtime, fewer tool changes, fewer re-runs and defects and decreased tooling costs.Usage:Laminated Wood Products, HPL and Fire Rated Materials Material: Melamine, Plywood, Laminates * = Mortise Compression Series: 60-100PLR

18 Item(s)

Set Descending Direction
©2018 Sharp Tech Inc.
All Rights Reserved