Tel: 1-877-228-0908

My Cart:

0 item(s) - US$0.00
You have no items in your shopping cart.

Plastics

Plastics

Router Bits for Plastics

Prices are Discounted a Minimum of 20%. Please check the Bargain Bin for items having a larger discount.

14 Item(s)

Set Descending Direction
  1. Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose

    Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose

    Designed for carving and modeling operations. The improved tip geomentry gives a superior cut compared to most ballnose endmills. Usage: Plastic, Solid Surface, Block and Plate Aluminim, Natural Wood and Wood Composites. Material: SW, HW, CW, SP, HP, A, SSP
  2. 63-500 Series Single Flute - Solid Carbide Upcut Spiral O Flute for Acrylics

    63-500 Series Single Flute - Solid Carbide Upcut Spiral O Flute for Acrylics

    These tools are designed to cut acrylics and achieve long tool life. Onsrud's unique cutting geometry produces a smooth edge finish regardless if it is cast or extruded acrylic. Usage: Acrylic
  3. Series 52-600  Double Flute - Solid Carbide Upcut Spiral O Flute

    Series 52-600 Double Flute - Solid Carbide Upcut Spiral O Flute

    Low Helix geometry designed to cut soft and hard plastics with a smooth finish and upward chip flow. Usage: Soft and Hard Plastics, Solid Surface. Series: 52-600
  4. Single Flute - Solid Carbide Upcut Spiral O Flute - Series 63-700 for Hard Plastics and 63-750 for Soft Plastics

    Single Flute - Solid Carbide Upcut Spiral O Flute - Series 63-700 for Hard Plastics and 63-750 for Soft Plastics

    Designed to provide a smooth finish in hard or soft plastics with upward chip removal. Usage: Acrylic, Nylon, Polycarbonate and Solid Surface Helix Angle: 21 Degrees Series: 63-700 for Hard Plastics & 63-750 for Soft Plastics
  5. Series 52-600  Double Flute - Solid Carbide Upcut Spiral O Flute

    Series 52-600 Double Flute - Solid Carbide Upcut Spiral O Flute

    Low Helix geometry designed to cut soft and hard plastics with a smooth finish and upward chip flow. Usage: Soft and Hard Plastics, Solid Surface. Series: 52-600
  6. Series 52-700  Double Flute - Solid Carbide Upcut Spiral O Flute

    Series 52-700 Double Flute - Solid Carbide Upcut Spiral O Flute

    With High Helix geometry, Highly Polished Flutes and Improved Point Geometry these tools are designed to cut soft plastics with a remarkably smooth finish and upward chip flow. Usage: Soft Plastic, Extruded Acrylic, Nylon, ABS, PE, Acetal, PET, HDPE, UHMW, Polycarbonate, Solid Surface and Foam. Series: 52-700
  7. Spoilboard Surfacing Cutter with HSK63F Integral Shank

    Spoilboard Surfacing Cutter with HSK63F Integral Shank

    The integral HSK 63F shank eliminates the need for a toolholder and collet. Other benefits include greatly increased rigidity and reduced runout. This enables faster feed rates, longer run times and better finish.

  8. Series 64-000 Single Flute - Solid Carbide Downcut Spiral O Flute

    Series 64-000 Single Flute - Solid Carbide Downcut Spiral O Flute

    The polished flute allows for a razor sharp cutting edge and easy chip evacuation. The downcut spiral geometry improves part holding. Excellent performance in a wide range of materials. Usage: Plastic, Wood, Aluminum and Solid Surface
  9. Series 65-000 Single Flute - Solid Carbide Upcut Spiral O Flute

    Series 65-000 Single Flute - Solid Carbide Upcut Spiral O Flute

    The polished flute allows for a razor sharp cutting edge and easy chip evacuation. Excellent performance in a wide range of materials. Usage: Plastic, Wood, Aluminum and Solid Surface
  10. Series 91-000/100 Spoilboard Surfacing Cutter

    Series 91-000/100 Spoilboard Surfacing Cutter

    Designed for surfacing MDF, particleboard and balsa core where "flow through" or "high flow" fixturing is employed using large capacity vacuum pumps. This method of surfacing spoilboards allows for much faster table planing. Usage: Aluminum, Plastics and Composite Wood Series: 91-000/100
  11. Single Flute - Solid Carbide Downcut Spiral O Flute - Series 62-700 for Hard Plastics and 62-750 for Soft Plastics

    Single Flute - Solid Carbide Downcut Spiral O Flute - Series 62-700 for Hard Plastics and 62-750 for Soft Plastics

    Designed to provide a smooth finish in hard or soft plastics with downward chip removal. Usage: Acrylic, Nylon, Polycarbonate and Solid Surface Helix Angle: 21 Degrees Series: 62-700 for Hard Plastics & 62-750 for Soft Plastics
  12. Single Flute - Solid Carbide Upcut Spiral O Flute - Series 63-700 for Hard Plastics and 63-750 for Soft Plastics

    Single Flute - Solid Carbide Upcut Spiral O Flute - Series 63-700 for Hard Plastics and 63-750 for Soft Plastics

    Designed to provide a smooth finish in hard or soft plastics with upward chip removal. Usage: Acrylic, Nylon, Polycarbonate and Solid Surface Helix Angle: 21 Degrees Series: 63-700 for Hard Plastics & 63-750 for Soft Plastics
  13. 63-500 Series Single Flute - Solid Carbide Upcut Spiral O Flute for Acrylics

    63-500 Series Single Flute - Solid Carbide Upcut Spiral O Flute for Acrylics

    These tools are designed to cut acrylics and achieve long tool life. Onsrud's unique cutting geometry produces a smooth edge finish regardless if it is cast or extruded acrylic. Usage: Acrylic
  14. Series 52-700  Double Flute - Solid Carbide Upcut Spiral O Flute

    Series 52-700 Double Flute - Solid Carbide Upcut Spiral O Flute

    With High Helix geometry, Highly Polished Flutes and Improved Point Geometry these tools are designed to cut soft plastics with a remarkably smooth finish and upward chip flow. Usage: Soft Plastic, Extruded Acrylic, Nylon, ABS, PE, Acetal, PET, HDPE, UHMW, Polycarbonate, Solid Surface and Foam. Series: 52-700

14 Item(s)

Set Descending Direction
©2018 Sharp Tech Inc.
All Rights Reserved