Tel: 1-877-228-0908

My Cart:

0 item(s) - US$0.00
You have no items in your shopping cart.

Aluminum

Aluminum

Milling Tools for Aluminum

10 Item(s)

Set Descending Direction
  1. Series 52-000 Double Flute-Solid Carbide Upcut Spiral

    Series 52-000 Double Flute-Solid Carbide Upcut Spiral

    Designed as a general purpose spiral with several times the life of their high speed steel counterparts. They are used when upward chip flow is prefered. Usage: Fiberglass, Phenolic, Acetal, Solid Surface and Aluminum slab Series: 52-000
  2. Series 29-100/29-100B Solid Carbide Honeycomb Hogger (ZRN Coated)

    Series 29-100/29-100B Solid Carbide Honeycomb Hogger (ZRN Coated)

    Designed to be a versatile tool and cut most honeycomb core materials. The solid carbide body offers long tool life while the proven hogger geometry shreds the core and evacuates chips. The long flute length allows for deep pocket applications and can also be used to surface large areas. Usage: Honeycomb Series: 29-100/29-100B
  3. Series 64-000 Single Flute - Solid Carbide Downcut Spiral O Flute

    Series 64-000 Single Flute - Solid Carbide Downcut Spiral O Flute

    The polished flute allows for a razor sharp cutting edge and easy chip evacuation. The downcut spiral geometry improves part holding. Excellent performance in a wide range of materials. Usage: Plastic, Wood, Aluminum and Solid Surface
  4. Series 65-000 Single Flute - Solid Carbide Upcut Spiral O Flute

    Series 65-000 Single Flute - Solid Carbide Upcut Spiral O Flute

    The polished flute allows for a razor sharp cutting edge and easy chip evacuation. Excellent performance in a wide range of materials. Usage: Plastic, Wood, Aluminum and Solid Surface
  5. Series 91-000/100 Spoilboard Surfacing Cutter

    Series 91-000/100 Spoilboard Surfacing Cutter

    Designed for surfacing MDF, particleboard and balsa core where "flow through" or "high flow" fixturing is employed using large capacity vacuum pumps. This method of surfacing spoilboards allows for much faster table planing. Usage: Aluminum, Plastics and Composite Wood Series: 91-000/100
  6. Series 62-600 Single Flute-Solid Carbide Downcut Spiral O Flute

    Series 62-600 Single Flute-Solid Carbide Downcut Spiral O Flute

    High speed cutters for machining aluminum sheet & block material. These tools are optomized for use on high-speed CNC mills, high speed machining centers & CNC routers. Usage: Aluminum plate and single/multi sheet aluminum. Helix Angle: 22 Degrees Series: 62-600
  7. Series 57-000 Double Flute-Solid Carbide Downcut Spiral

    Series 57-000 Double Flute-Solid Carbide Downcut Spiral

    Designed as a general purpose spiral with several times the life of their high speed steel counterparts. They are used when downward chip flow is prefered. Usage: Aluminum and Composite Plastic Series: 57-000
  8. Series 63-600 Single Flute-Solid Carbide Upcut Spiral O Flute

    Series 63-600 Single Flute-Solid Carbide Upcut Spiral O Flute

    High speed cutters for machining aluminum sheet & block material. These tools are optomized for use on high-speed CNC mills, high speed machining centers & CNC routers. Usage: Aluminum plate and single/multi sheet aluminum. Helix Angle: 22 Degrees Series: 63-600
  9. Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose

    Series 52-200B/BL Double Flute - Solid Carbide Upcut Spiral Ball Nose

    Designed for carving and modeling operations. The improved tip geomentry gives a superior cut compared to most ballnose endmills. Usage: Plastic, Solid Surface, Block and Plate Aluminim, Natural Wood and Wood Composites. Material: SW, HW, CW, SP, HP, A, SSP
  10. Spoilboard Surfacing Cutter with HSK63F Integral Shank

    Spoilboard Surfacing Cutter with HSK63F Integral Shank

    The integral HSK 63F shank eliminates the need for a toolholder and collet. Other benefits include greatly increased rigidity and reduced runout. This enables faster feed rates, longer run times and better finish.

10 Item(s)

Set Descending Direction
©2018 Sharp Tech Inc.
All Rights Reserved